Transfer Case - Vehicles With: Twin Speed Transfer Case (G2951355): Specifications
CAUTION:
Do not use any lubricant other than that specified
LUBRICANTS SPECIFICATION
| ITEM | SPECIFICATION |
|---|---|
| Recommended oil | Shell TF 0753 |
| Capacity - Wet and dry fill | 1.5 liters, (2.6 pints) (1.5 US quarts) |
| Input shaft splines grease | Weicon TL7391 |
| Transfer case sealant | TL 7990 Hylomar black 102 or equivalent |
| ITEM | SPECIFICATION |
|---|---|
| Model | DD295 |
| Type | Two speed, permanent four wheel drive transfer case having synchronised low to high ratio shift on the move facility with an actively controlled wet clutch and 50/50 torque split across the centre differential |
| Clutch type | Wet, multi-plate |
| Maximum torque capacity | 2500 Nm (1842.5 lb-ft) |
| Ratios: | - |
| High | 1:1 |
| Low | 2.93:1 |
| Maximum shift speeds: | - |
| High to low ratio | 0 km/h (0 mph) |
| Low to high ratio | 60 km/h (37.2 mph) |
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT |
|---|---|---|
| Transfer case fluid drain plug | 28 | 21 |
| Transfer case fluid filler/level plug | 28 | 21 |
| Transfer case support bolts | 60 | 44 |
| Transfer case to transmission bolts | 45 | 33 |
| Wiring harness bracket bolts | 25 | 18 |
| Transfer case ground connection bolt | 25 | 18 |
| + Transfer case shift motor bolts | 35 | 26 |
| + Transfer case high/low range position sensor bolts | 5 | 4 |
| Noise, Vibration and Harshness (NVH) damper | 72 | 53 |
| Heatshield bolts | 8 | 6 |
+ New bolts must be used when a new component is installed.