Rear Stabilizer Bar Link - Vehicles Without: Dynamic Suspension (G2320543): Installation
-
CAUTION:
- Nuts must be tightened with vehicle at normal ride height.
- Use a wrench on the hexagon provided to prevent the ball joint rotating.
- Install the stabilizer bar link.
- Install and tighten the upper nut.
Torque : 185 Nm
-
CAUTION:
- Nuts must be tightened with vehicle at normal ride height.
- Use a wrench on the hexagon provided to prevent the ball joint rotating.
Install and tighten the lower nut.
Torque : 185 Nm
- Install the rear wheel.
Refer to: WHEEL AND TIRE