LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Range Rover Sport HST >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Charging And Controls - Turbocharger - INGENIUM I6 3.0L Petrol -- Range Rover Sport/L494 >> Fuel Charging And Controls - Turbocharger - INGENIUM I6 3.0L Petrol >> Diagnosis And Testing >> Turbocharger (G2297096) >> Control Module Cavity

Control Module Cavity

INPUT/OUTPUT CIRCUIT DESCRIPTION
PCM
  • O_T_CPRC1
    • Output from PCM
Compressor bypass A solenoid
PCM
  • O_V_5VCOP
    • Output 5 volts from PCM
  • I_A_COP
    • Analogue input to PCM
  • G_R_COP/G_R_COT
    • Ground reference from PCM
Post turbocharger compressor pressure sensor
PCM
  • O_V_5VBPS
    • Output 5 volts from PCM
  • I_A_BPS
    • Analogue input to PCM
  • G_R_BPTS
    • Ground reference from PCM
  • I_A_BTS
    • Analogue input to PCM
TMAP post WCAC sensor
PCM
  • O_T_EBBPOS
    • Output from PCM
  • O_T_EBBNEG
    • Output from PCM
  • O_V_5VEBB
    • Output 5 volts from PCM
  • I_A_EBB
    • Analogue input to PCM
  • G_R_EBB
    • Ground reference from PCM
Ebooster bypass valve
PCM
  • B_D_PMZ_CANH
    • Communication
  • B_D_PMZ_CANL
    • Communication
Communication bus
Electric supercharger
  • C2-1 - +
12V Supply
Electric supercharger
  • C2-2 - I/O
CAN Low
Electric supercharger
  • C2-3 - I/O
CAN High
Electric supercharger
  • C2-4 - Gnd
Ground
Electric supercharger
  • C1-1 - + 48V
48V Power
Electric supercharger
  • C1-2 - - 48V
48V Ground