Driveshaft (G1950134): Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT | ||
|---|---|---|---|---|
| (1)Front driveshaft to front axle drive flange Torx bolts: | ||||
| Stage 1 | 45 | 33 | ||
| Stage 2 | Further 90° | Further 90° | ||
| Rear driveshaft to transfer case drive flange Torx bolts | 150 | 111 | ||
| Rear driveshaft center bearing bolts | 48 | 35 | ||
| Fuel tank heat shield bolts | 5 | 4 | ||
| + Front driveshaft to front differential DTF CV joint lock nut | 150 | 111 | ||
| ++ Rear driveshaft to rear differential DTF CV joint lock nut | 150 | 111 | ||
|
||||
+ Refer to the front driveshaft tightening procedure in the appropriate service information.
++ Refer to the rear driveshaft tightening procedure in the appropriate service information.