Rear Drive HALFSHAFTS (G1950136): Specifications
RECOMMENDED LUBRICANT SPECIFICATION
| ITEM |
SPECIFICATION |
| Outboard joint |
Use grease supplied with replacement boot kit |
| Inboard joint |
Use grease supplied with replacement boot kit |
GENERAL SPECIFICATION
| ITEM |
SPECIFICATION |
| Type |
Fixed outer Constant Velocity joint (CV), plunging inboard joint, solid interconnecting shafts, with inner and outer constant velocity joints |
TORQUE SPECIFICATIONS
| ITEM |
NM |
LB-FT |
LB-IN |
| Lower arm to wheel knuckle bolt |
70 + 240° |
52 + 240° |
- |
| Upper arm to wheel knuckle nut and bolt |
50 + 60° |
37 + 60° |
- |
| Toe link to lower arm nut and bolt |
50 + 180° |
37 + 180° |
- |
| Toe link to wheel knuckle nut and bolt |
70 + 240° |
52 + 240° |
- |
| Shock absorber to wheel knuckle nut and bolt |
100 + 240° |
74 + 240° |
- |
| Rear wheel speed sensor bolt |
9 |
- |
80 |
| Brake disc shield to wheel knuckle bolt |
9 |
- |
80 |
| Halfshaft retaining nut. Core
vehicles only. |
Stage 1 - 300 |
Stage 1 - 221 |
- |
| - |
Stage 2 - Loosen 90° |
Stage 2 - Loosen 90° |
- |
| - |
Stage 3 - 140 |
Stage 3 - 103 |
- |
| - |
Stage 4 - 30° |
Stage 4 - 30° |
- |
| Halfshaft retaining nut. Long Wheel Base (LWB)
, SVR
and armored
vehicles only. |
Stage 1 - 300 |
Stage 1 - 221 |
- |
| - |
Stage 2 - Loosen 90° |
Stage 2 - Loosen 90° |
- |
| - |
Stage 3 - 120 |
Stage 3 - 88 |
- |
| - |
Stage 4 - 60° |
Stage 4 - 60° |
- |