Brake Pad Replacement

To replace the rear brake pads or discs it is necessary to fully retract the thrust nuts to allow retraction of the caliper pistons.

For additional information, Refer to: BRAKE DISC - VEHICLES WITH: 325 MM BRAKE DISC /BRAKE DISC - VEHICLES WITH: 350 MM BRAKE DISC /BRAKE DISC - VEHICLES WITH: 365 MM BRAKE DISC

For additional information, Refer to: BRAKE PADS - VEHICLES WITH: 325 MM BRAKE DISC /BRAKE PADS - VEHICLES WITH: 350 MM BRAKE DISC /BRAKE PADS - VEHICLES WITH: 365 MM BRAKE DISC