Roof Opening Panel Blind/Roof Opening Panel Glass Faults - Remedial Actions

NOTE: If the roof opening panel blind is de-normalized the roof opening panel glass cannot open (roof opening panel blind position is not known). If the roof opening panel glass is de-normalized the roof opening panel blind cannot close (roof opening panel glass position is not known)

Fault Type	REMEDIAL ACTION
No Blind One-Touch No Glass One-Touch	Check the body control module for related DTC s and refer to the relevant DTC index. Check the operation of the relevant switches and circuits and rectify as required. After rectification of any faults, re-initialize the roof opening panel blind/roof opening panel glass as detailed below
Blind - Lost Initialization Glass - Lost Initialization	Check the body control module for related DTC s and refer to the relevant DTC index. Check the operation of the relevant switches and circuits and rectify as required. After rectification of any faults, re-initialize the roof opening panel blind/roof opening panel glass as detailed below
Blind Pinch Detection Error Glass Pinch Detection Error	Check the guide rails and mechanism for any signs of damage or debris and rectify as required. After rectification of any faults, re-initialize the roof opening panel blind/roof opening panel glass as detailed below. If there is no sign of debris or mechanical damage, check if the roof finishers are installed too tightly to the sunroof rear panel. Remove finishers, loosen clips and move outboard 1 mm, re-tighten clips and refit finishers. Re-initialize the roof opening panel blind/roof opening panel glass as detailed below
Blind - No Function Glass - No Function	Check the operation of the relevant switches and circuits and rectify as required. After rectification of any faults, re-initialize the roof opening panel blind/roof opening panel glass as detailed below