Pinpoint Test M: Massage Seat Tests

M1: MASSAGE SEAT TEST 1
1. Using the Jaguar Land Rover approved diagnostic equipment, perform routine - On Demand Self Test
2. Check the relevant seat module for related DTCs
  Are any relevant DTCs set?
  
  Yes: Perform the relevant corrective action
  
  No: GO to M2.
M2: MASSAGE SEAT TEST 2
NOTE: The massage circuit current specification is 1.10A ± 10%.
1. Connect an inductive ammeter to the massage master solenoid power circuit
2. Set the seat massage function to on
  Is the measured current less than specification?
  
  Yes: Refer to the electrical circuit diagrams and check the seat massage circuits for open circuit, high resistance
  
  No: Check the massage air cell hoses for blockages/leaks