Upper Control Arm (G2296781): Installation

- Install the upper control arm.
- Renew and tighten the upper control arm to subframe nut and bolt.
  Renew Part: Upper control arm to subframe nuts and bolts Quantity: 1 .
- Renew and tighten the upper control arm to wheel knuckle nut and bolt.
  Renew Part: Rear upper arm to wheel knuckle nut and bolt Quantity: 1 .
  
  Torque
  
  Stage 1: 40 Nm
  
  Stage 2: 180°
Remove the supporting stand from under the lower control arm.
Install the wheel and tire.
Refer to: WHEEL AND TIRE .