Shock Absorber (G2296778): Installation

- Install the spring aid.
- Install the shock absorber boot
- Install the shock absorber top mounting.
- Renew the top shock absorber nut.
  Renew Part: Shock absorber nut Quantity: 1 .
  
  Torque : 30 Nm
Install the cap.
- Install the shock absorber.
- Install and tighten 2 new upper bolts.
  Renew Part: Shock absorber upper mounting bolt Quantity: 2 .
  
  Torque
  
  Stage 1: 70 Nm
  
  Stage 2: 60°
Reposition the front section of the wheel arch liner.
- Secure the shock absorber to the wheel knuckle.
- Renew the shock absorber lower nut and bolt.
  Renew Part: Shock absorber to wheel knuckle mounting nut and bolt Quantity: 1 .
  
  Torque : 170 Nm
Remove the stand.
Connect and secure the shock absorber wiring harness.
Install the wheel and tire.
Refer to: WHEEL AND TIRE .