Occupant Detection Sensor - Vehicles With: Row Specification (G2312033): Installation
-
CAUTION: Make sure that the component is installed to the noted removal position.
Install the Occupant Detection Sensor (ODS).
- Feed through the wiring harness and install a new front row seat cushion heater element.
Renew Part: Front row seat cushion heater element Quantity: 1 .
- Install the front row seat cushion cover.
Refer to: FRONT ROW SEAT CUSHION COVER .
- Connect the electrical connector.
- Connect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT .