Front Right Impact Sensor (G2308750): Installation

- Install the front right impact sensor.
- Install and tighten the bolt.
  Torque : 10 Nm
- Connect the electrical connector.
- Install a new O-ring seal.
  Renew Part: Air conditioning pipe O-ring seal(s) Quantity: 1 .
- Install the Air Conditioning (A/C) pipe.
- Install and tighten the nut.
  Torque : 9 Nm
Install the engine coolant hose.
Install the 2 engine coolant hoses.
Charge the A/C system.
Refer to: AIR CONDITIONING SYSTEM RECOVERY, EVACUATION AND CHARGING .
Fill and bleed the cooling system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .
Connect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT .