LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Range Rover Evoque SE >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Engine Ignition - INGENIUM I4 2.0L Petrol -- Range Rover EVOQUE/L551 >> Engine Ignition - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Spark Plugs (G2299463) >> Removal

Spark Plugs (G2299463): Removal

NOTE:
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  1. Remove the engine cover.

    Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL .

  2. G14451618Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Disconnect the electrical connector.

  3. G14451619Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Disconnect the electrical connectors.
    • Remove the bolts.
    • Remove the ignition coil-on-plugs.
  4. G14451623Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Using the special tool, remove the spark plugs.

    Special Tool(s): 303-1450 

scientia non olet · About LEMON Manuals