LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Range Rover Evoque SE >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Charging And Controls - INGENIUM I4 2.0L Petrol -- Range Rover EVOQUE/L551 >> Fuel Charging And Controls - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Fuel Rail (G2110425) >> Installation

Fuel Rail (G2110425): Installation

  1. CAUTION: Make sure the threads are clean and free from fuel.
    • Lubricate the threads with silicone free lubricant.

      Material: Silicone Free Lubricant () 

    • Install the fuel rail pressure sensor.

      Torque  : 38 Nm 

  2. Install the fuel injectors.

    Refer to: FUEL INJECTORS .

  3. Connect the startup battery ground cable.

    Refer to: 12V SYSTEM DISCONNECT .

  4. Bleed the fuel system and check for leaks.

    Refer to: FUEL SYSTEM BLEEDING .

scientia non olet · About LEMON Manuals