| Engine cranks, but does not fire |
- Positive crankcase ventilation system blocked/leaking
- Engine system fault
|
- Check the integrity of the positive crankcase ventilation system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
|
| Engine cranks and fires, but will not start |
- Evaporative emissions system fault
- Engine system fault
|
- Refer to the relevant service information and check the purge valve
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
|
| Difficult cold start |
- Engine coolant level/anti-freeze content
- Battery/charging system fault
- Engine system fault
- Evaporative emissions system fault
|
- Check the engine coolant level and condition. Rectify as necessary
- Refer to the relevant service information and check the battery and charging system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
- Refer to the relevant service information and check the evaporative emissions system. Rectify as necessary
|
| Difficult hot start |
- Fuel injector leaking
- Engine system fault
- Evaporative emissions system fault
|
- Check the fuel injectors for leaks. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
- Refer to the relevant service information and check the evaporative emissions system. Rectify as necessary
|
| Difficult to start after hot soak (vehicle standing, engine off, after engine has reached operating temperature) |
- Fuel injector leaking
- Engine system fault
- Evaporative emissions system fault
|
- Check the fuel injectors for leaks. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
- Refer to the relevant service information and check the evaporative emissions system. Rectify as necessary
|
| Engine stalls soon after start |
- Positive crankcase ventilation system blocked/leaking
- Engine system fault
- Intake air system leaking/restricted
|
- Check the integrity of the positive crankcase ventilation system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
- Check the intake air system for leaks and restrictions. Rectify as necessary
|
| Engine hesitates/poor acceleration |
- Fuel injector leaking
- Engine system fault
- Transmission system fault
- Intake air system leaking/restricted
- Accelerator pedal movement restricted (carpet, mats, etc)
|
- Check the fuel injectors for leaks. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
- Using the Jaguar Land Rover approved diagnostic equipment, check the transmission control module for related DTC
s and refer to the relevant DTC
index
- Check the intake air system for leaks and restrictions. Rectify as necessary
- Check that the accelerator pedal is free from restriction. Rectify as necessary
|
| Engine backfires |
- Intake air system leaking/restricted
- Engine system fault
|
- Check the intake air system for leaks and restrictions. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
|
| Engine surges |
|
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
|
| Engine detonates/knocks |
- Intake air system leaking/restricted
- Engine system fault
|
- Check the intake air system for leaks and restrictions. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
|
| No throttle response |
|
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
|
| Poor throttle response |
- Positive crankcase ventilation system blocked/leaking
- Engine system fault
- Transmission system fault
- Intake air system leaking/restricted
|
- Check the integrity of the positive crankcase ventilation system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
- Using the Jaguar Land Rover approved diagnostic equipment, check the transmission control module for related DTC
s and refer to the relevant DTC
index
- Check the intake air system for leaks and restrictions. Rectify as necessary
|
|
NOTE:
This symptom/action is only applicable to the following vehicles - Discovery Sport (L550) 18-20MY up to Vehicle Identification Number (VIN) SALCT2FX7MH882806 - Range Rover Evoque (L551) 20MY up to VIN
SALZA2AXXMH121887 Vehicle has low idle speed when stationary (typically 400RPM) and when load is then applied to pull away the engine will stop |
- Low fuel quality (lower than handbook requirements) combined with higher temperatures or altitude leads to engine knock control being active
- Powertrain Control Module (PCM) software is not at latest version
|
NOTE:
Please make sure that the Jaguar Land Rover approved diagnostic equipment is updated to a minimum of Pathfinder 327 or later
- Using the Jaguar Land Rover approved diagnostic equipment, run application - ECU Diagnostics/Powertrain Control Module/Update ECU
|
| Malfunction Indicator Lamp (MIL) illuminated on the instrument cluster and DTC
P144B-00 "Evaporative Emission System Secondary Purge Vapor Line Restricted/Blocked - No sub type information" set within the PCM |
- PCM
software requires updating
- Purge valve electrical fault
- Purge pressure sensor electrical fault
- Boost pressure below target
- Purge valve blockages
- Air leaks
|
|