Instrument Cluster Lens (G2308917): Removal
CAUTION:
- Care must be taken when handling the component. Do not place on a surface with the instrument cluster faced down. Failure to follow this instruction may damage the component.
- Do not use excessive force to remove the component. Make sure that all fixings are fully released.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Disconnect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT .
- Remove the instrument cluster.
Refer to: INSTRUMENT CLUSTER .
Remove the 4 bolts.
-
CAUTION:
- Use a suitable plastic trim tool to release the component.
- Take extra care not to damage the component.
NOTE: Release the clips in the indicated sequence.- Release the 7 clips.
- Remove the instrument cluster lens.