Instrument Cluster Lens (G2308917): Installation
NOTE:
Make sure that all the clips are correctly installed.
-
CAUTION: Take extra care not to damage the component.NOTE:
- Take care not to leave finger prints inside the new lens.
- Secure the clips in the indicated sequence.
- Install the instrument cluster lens.
- Secure the 7 clips.
- Install and tighten the 4 bolts.
Torque : 2 Nm
- Install the instrument cluster.
Refer to: INSTRUMENT CLUSTER .
- Connect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT .