Rear HALFSHAFT Seal (G2339355): Removal

NOTE:

Left side shown, right side similar.
This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING .
Remove the rear halfshaft.
Refer to: REAR HALFSHAFT .
WARNING: Make sure that the special tool is located correctly.
CAUTION:
- Take extra care not to damage the mating faces.
- Take extra care not to damage the edges of the component.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Use the special tools to remove the rear halfshaft seal.
  Special Tool(s): 100-012 , 100-012-01 , 308-375
- Discard the seal.