Roof Opening Panel (G2389857): Removal
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Open the roof opening panel blind.
- Disconnect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT .
-
CAUTION: Take extra care not to damage the component.NOTE: Repeat this step for the other side.
- Release the 4 clips.
- Remove the trim panel.
-
NOTE: Repeat this step for the other side.
Remove the 3 bolts.
-
NOTE: This step requires the aid of another technician.
Remove the roof opening panel.