LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Range Rover Evoque SE >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Roof Opening Panel -- Range Rover EVOQUE/L551 >> Roof Opening Panel >> General Procedures >> Roof Opening Panel Initialization (G2391025) >> Adjustment

Roof Opening Panel Initialization (G2391025): Adjustment

  1. NOTE: If the roof opening panel does not operate after 60 seconds connect the Jaguar Land Rover (JLR) approved diagnostic equipment and clear the Diagnostic Trouble Codes (DTCs).
    • Press and hold the front of the roof opening panel switch for more than 10 seconds, to start the reset cycle. Release the switch. After 2 seconds, press the switch.
    • The reset cycle will fully open the roof opening panel blind.
    • Fully open and then fully close the roof opening panel.
    • Fully close the roof opening panel blind.
    • Once the open/close cycle has completed and the roof opening panel blind has stopped moving, release the switch.
    • The roof opening panel is now synchronized.
    • The roof opening panel can now be operated as normal.