Symptom Chart

SYMPTOM	POSSIBLE CAUSES	ACTION
Water ingress from roof opening panel - Front and Rear Fixed Glass Panels	Breaks in seals or adhesive beads	Identify the area of the leak (see procedures outlined below). Remove the roof opening panel glass. Remove the existing adhesive bead and reapply using the correct bonding procedure
Water ingress from roof opening panel - Sliding Central Glass Panel	Debris in the channels/guides Drain tube(s) blocked Damage to the roof opening panel glass seal Roof opening panel not correctly aligned	Check and clear any debris in the channels/guides Check drain tube(s) and unblock as required Check for damage to the roof opening panel glass seal Check roof opening panel alignment and rectify as required