Symptom Chart

SYMPTOM	POSSIBLE CAUSE	ACTION
Misty/foggy/blurry image displayed on the touchscreen when operating the rear view camera, limiting visibility when maneuvering the vehicle	Evidence of water ingress/oxidation/corrosion on camera housing	Install a new rear view camera Refer to: REAR PROXIMITY CAMERA .
Rear view camera image slow to react	System operation within specification	NOTE: After selecting reverse, it may take up to 20 seconds for the image to be displayed No further action necessary
Blank screen	Touchscreen fault Rear view camera not functioning	Using the Jaguar Land Rover approved diagnostic equipment, check the infotainment master controller/audio head unit/touchscreen (as fitted) for related DTC s and refer to the relevant DTC index GO to PINPOINT TEST A .
Blue screen	Video in signal absent	GO to PINPOINT TEST B .
No tracking lines	Missing/invalid reverse gear signal Local Interconnect Network (LIN) fault	Using the Jaguar Land Rover approved diagnostic equipment, check the body control module for related DTC s and refer to the relevant DTC index GO to PINPOINT TEST C .
Frozen tracking lines	LIN data gateway fault	GO to PINPOINT TEST D .