Front Row Seat SWITCHPACK (G2308080): Installation
-
- Install the front row seat switchpack.
- Install and tighten the 4 screws.
Torque : 1.4 Nm
-
- Connect the electrical connector.
- Install the front row seat outer valance.
- Position the front row seatbelt pretensioner.
- Install and tighten the bolt.
Renew Part: Front row seatbelt pretensioner bolt Quantity: 1 .
- Connect the front row seatbelt pretensioner electrical connector.
- Connect the startup battery ground cable.
Refer to: SPECIFICATIONS .
- Move the front row seat to the original position.