Immediate Adjustment
NOTE:
To prevent excessive startup battery discharge, the heating or cooling of the front row seats will only operate when the engine is running.
Operating 1 of the adjustment switches will initiate the corresponding motor for that axis until the switch is released. Only 2 seat motors can be driven at any one time.
In order to adjust the seats the ignition must be switched ON.
If the seat encounters an obstruction it will stop moving and all further movement will be restricted.
The seat must be reset to continue movement, as follows:
- Remove the obstruction.
- Move the seat to the point where movement ceased.
- Press and hold the switch for at least 2 seconds to override the obstruction.