Crankshaft Front Seal - INGENIUM I4 2.0L Petrol (G2344449): Removal

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING
Disconnect the startup battery ground cable.
Refer to: SPECIFICATIONS
Remove the crankshaft pulley.
Refer to: CRANKSHAFT PULLEY - INGENIUM I4 2.0L PETROL
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Use the special tool to remove and discard the crankshaft front oil seal.

Special Tool(s): JLR-303-1628