Control Diagram
A = HARDWIRED: O = LIN : AL = PWM : AX = FLEXRAY BUS: BA = HS CAN HMI SYSTEMS BUS.
| ITEM | DESCRIPTION |
|---|---|
| 1 | PCM |
| 2 | IPC |
| 3 | BCM /GWM |
| 4 | HVAC |
| 5 | Anti-Lock Brake System Control Module (ABS) |
| 6 | Variable coolant pump |
| 7 | Auxiliary electric cooling fan |
| 8 | Main electric cooling fan |
| 9 | Auxiliary coolant pump |
| 10 | Electric thermostat |
| 11 | Auxiliary coolant pump |
| 12 | Active grille air shutter - Lower - If equipped |
| 13 | Active grille air shutter - Upper - If equipped |
| 14 | Ground |
| 15 | Power supply |
| 16 | Variable coolant pump shroud position sensor |
| 17 | Cylinder head temperature sensor |
| 18 | Cylinder block temperature sensor |
| 19 | Radiator outlet temperature sensor |
| 20 | Engine Coolant Temperature (ECT) sensor - Electric thermostat housing |
| 21 | AAT sensor |
| 22 | Engine coolant level sensor |