Right Post Catalyst Heated Oxygen Sensor (G2796695): Removal

WARNING: This page is about a different variant/trim than selected.

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING
Remove the transmission undershield.
Refer to: TRANSMISSION UNDERSHIELD
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Release the right post catalyst Heated Oxygen Sensor (HO2S) electrical connector heatshield.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Disconnect the electrical connector from the right post catalyst HO2S .
- Use the special tool to remove the right post catalyst HO2S .
  Special Tool(s): JLR-309-004