LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 90 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Electronic Engine Controls - V8 S/C 5.0L Petrol -- Defender/L663) >> Electronic Engine Controls - V8 S/C 5.0L Petrol (G2796672) >> Removal And Installation >> Left Camshaft Position Sensor (G2796674) >> Installation

Left Camshaft Position Sensor (G2796674): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the CMP  .
    • Install and tighten the bolt.

      Torque  : 10 Nm 

    • Connect the electrical connector to the CMP  .
  2. Install the thermostat housing.

    Refer to: THERMOSTAT HOUSING

scientia non olet · About LEMON Manuals