Control Diagram - 1 Of 2
WARNING: This page is about a different variant/trim than selected.
A = HARDWIRED: AL = PWM: BA = HIGH SPEED (HS) CONTROLLER AREA NETWORK (CAN) HUMAN MACHINE INTERFACE (HMI) SYSTEMS BUS: BL = HS CAN UNDERBODY SYSTEMS BUS: AX = FLEXRAY.
| ITEM | DESCRIPTION |
|---|---|
| 1 | PCM |
| 2 | BCM /GWM |
| 3 | RCM |
| 4 | ABS |
| 5 | Power Steering Control Module (PSCM) |
| 6 | IPC |
| 7 | AAM |
| 8 | TCS |
| 9 | VCFCM |
| 10 | Electric cooling fan |
| 11 | Charge air coolant pump |
| 12 | DMTL pump |
| 13 | FPDM |
| 14 | Ground |
| 15 | Power supply |
| 16 | Charge air temperature sensor |
| 17 | VCFCM - Speed signal |
| 18 | LP fuel sensor |
| 19 | Oil level and temperature sensor |
| 20 | FRPT sensor |
| 21 | Brake pedal signal - Integrated Power Brake |
| 22 | ECT sensor (quantity 2) |
| 23 | APP sensor |