LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 90 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Electronic Engine Controls - INGENIUM I6 3.0L Petrol -- Defender/L663) >> Electronic Engine Controls - INGENIUM I6 3.0L Petrol >> Removal And Installation >> Mass Air Flow Sensor (G2300699) >> Installation

Mass Air Flow Sensor (G2300699): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Make sure that the mating faces are clean and free of foreign material.
    • Install the MAF  sensor.
    • Install and tighten the 2 bolts.

      Torque  : 2 Nm 

    • Connect the MAF  sensor electrical connector.
scientia non olet · About LEMON Manuals