Control Diagram - 2 Of 2
WARNING: This page is about a different variant/trim than selected.
A = HARDWIRED: AL = PWM .
| ITEM | DESCRIPTION |
|---|---|
| 1 | PCM |
| 2 | Oil pump control solenoid |
| 3 | Fuel injector (quantity 6) |
| 4 | Ignition coil (quantity 6) |
| 5 | HO2S (quantity 3) |
| 6 | Active exhaust actuator |
| 7 | VCT solenoid (quantity 2) |
| 8 | FPDM |
| 9 | Electric throttle |
| 10 | Piston cooling oil jet solenoid |
| 11 | Purge valve |
| 12 | HP fuel pump |
| 13 | Continuous Variable Valve Lift (CVVL) solenoid (quantity 6) |
| 14 | Ground |
| 15 | Power supply |
| 16 | Oil pressure and temperature sensor |
| 17 | Exhaust back pressure sensor (if equipped) |
| 18 | MAFT sensor |
| 19 | MAF sensor |
| 20 | CVVL assembly oil temperature sensor |
| 21 | FRPT sensor |
| 22 | Electric throttle - Throttle Position Sensor (TPS) signal |
| 23 | VCT solenoid position sensor (quantity 2) |
| 24 | Knock sensor (quantity 3) |
| 25 | Cylinder block temperature sensor |
| 26 | Cylinder head temperature sensor |
| 27 | CMP (quantity 2) |
| 28 | CKP |
| 29 | MAPT |
| 30 | HO2S (quantity 3) |
| 31 | Purge valve pressure sensor |