Thermostatic Control Valve (G2394934): Installation

WARNING: This page is about a different variant/trim than selected.

- Install the thermostatic control valve.
  Renew Part: Thermostatic control valve Quantity: 1 .
- Install and tighten the 2 bolts.
  Torque : 11.5 Nm
- Install 2 new O-ring seals.
  Renew Part: Thermostatic control valve pipe O-ring seal(s) Quantity: 2 .
- Install the coolant pipe.
- Install and tighten the bolt.
  Torque : 5 Nm
Install the supercharger.
Refer to: SUPERCHARGER
Install the rear coolant manifold.
Refer to: REAR COOLANT MANIFOLD
Connect the startup battery ground cable.
Refer to: SPECIFICATIONS