LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 90 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Cooling - V8 S/C 5.0L Petrol -- Defender/L663) >> Engine Cooling - V8 S/C 5.0L Petrol (G2796565) >> Removal And Installation >> Engine Coolant Level Sensor (G2806739) >> Removal

Engine Coolant Level Sensor (G2806739): Removal

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: JACKING AND LIFTING

  2. CAUTION: The engine coolant level sensor is not serviceable as separately. This is supplied as part of the expansion tank.

    Remove the engine coolant expansion tank.

    Refer to: COOLANT EXPANSION TANK 

scientia non olet · About LEMON Manuals