LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 90 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Cooling - V8 S/C 5.0L Petrol -- Defender/L663) >> Engine Cooling - V8 S/C 5.0L Petrol (G2796565) >> Removal And Installation >> Cylinder Head Coolant Outlet Pipe (G2732374) >> Installation

Cylinder Head Coolant Outlet Pipe (G2732374): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Make sure that all traces of excess coolant are cleaned from the cylinder head area.
    • Install the lower pipe.

      Renew Part: Cylinder head coolant outlet lower pipe Quantity: 1  .

    • Install and tighten the 2 bolts.

      Torque  : 11.5 Nm 

  2. Make sure a new component is installed.

    Renew Part: Cylinder head coolant outlet upper pipe Quantity: 1  .

  3. Install the supercharger.

    Refer to: SUPERCHARGER

    Refer to: SUPERCHARGER

scientia non olet · About LEMON Manuals