LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 90 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Fuel Charging And Controls - INGENIUM I6 3.0L Petrol -- Defender/L663) >> Fuel Charging And Controls - INGENIUM I6 3.0L Petrol (G2344348) >> Removal And Installation >> Fuel Pump Driver Module (G3334288) >> Installation

Fuel Pump Driver Module (G3334288): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the FPDM  .
    • Install and tighten the 2 bolts.

      Torque  : 5 Nm 

    • Connect the FPDM  electrical connector.
  2. Install the rear right wheel arch liner.

    Refer to: REAR WHEEL ARCH LINER

scientia non olet · About LEMON Manuals