Dc/Dc Temperature Control
WARNING: This page is about a different variant/trim than selected.
The DC/DC is cooled by the DC/DC electric cooling fan. Operation of the DC/DC electric cooling fan is controlled by the DC/DC . The DC/DC has temperature sensors within the housing to monitor the internal temperatures. The DC/DC reports the internal temperature data to the PCM . The signal is sent through the HS CAN power mode zero systems bus.
The operation and speed of the DC/DC electric cooling fan is determined by the PCM , using internal temperature data and a computer model. Then the PCM sends the fan speed control signal back to the DC/DC . The DC/DC generates a PWM to control the DC/DC electric cooling fan speed. The lower DC/DC housing is finned to increase the surface area for the air to cool the DC/DC .