Control Diagram - 1 Of 2 - Starting System
WARNING: This page is about a different variant/trim than selected.
A = HARDWIRED: AX = FLEXRAY: AY = HS CAN POWER MODE ZERO SYSTEM BUS: AZ = HS CAN BODY SYSTEM BUS: BA = HS CAN HUMAN MACHINE INTERFACE (HMI) SYSTEM BUS: BL = HS CAN UNDERBODY (UN) SYSTEM BUS.
| ITEM | DESCRIPTION |
|---|---|
| 1 | BISG |
| 2 | PCM |
| 3 | BCM /GWM |
| 4 | Power Steering Control Module (PSCM) |
| 5 | TCS |
| 6 | Remote Function Actuator (RFA) |
| 7 | IPC |
| 8 | Touch Screen (FCDIM) |
| 9 | HVAC control module |
| 10 | MHEV battery |
| 11 | Power supply |
| 12 | Ground |
| 13 | Ground |
| 14 | Power supply |
| 15 | AAT sensor |
| 16 | Crankshaft Position Sensor (CKP) |
| 17 | APP sensor |
| 18 | Anti-Lock Brake System Control Module (ABS) |