Electrical Load Management

The BCM  /GWM  contains the electrical load management. The BCM  /GWM  monitors the vehicle system power loads in all Power Modes.

Engine Stop/Start Operation with The Starter Motor 

For additional information, Refer to: QUIESCENT DRAIN

When the engine is stopped, the BCM  /GWM  continues to monitor the startup battery State of Charge. When the startup battery voltage is less than 11.2V, the BCM  /GWM  initiates an engine start. A startup battery voltage of less than 11.2V, results in degraded starting performance or possible startup battery damage.