Auto Stop/Start Warning Indicator

WARNING: This page is about a different variant/trim than selected.

Auto Stop/Start Warning Indicator - System Active

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

The auto stop/start warning indicator illuminates green when the engine stops during a stop/start cycle, then extinguishes when the engine restarts.

Auto Stop/Start Warning Indicator - System Disabled

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

The auto stop/start warning indicator illuminates white when the auto stop/start system is disabled.

The auto stop/start warning indicator is controlled by the Powertrain Control Module (PCM). To illuminate the auto stop/start warning indicator, the PCM sends a signal to the Body Control Module/Gateway Module (BCM/GWM) through the FlexRay bus. The BCM/GWM transmits the message to the Instrument Cluster (IC) through the High Speed (HS) Controller Area Network (CAN) Human Machine Interface (HMI) systems bus.