Front Silencer (G2823263): Installation
WARNING: This page is about a different variant/trim than selected.
-
- Install the front silencer to the exhaust rear section.
- Install and tighten the 2 exhaust clamps.
Torque : 55 Nm
-
- With assistance install the exhaust rear section.
- Install the 6 exhaust mounting rubbers.
- Install and tighten the 2 front exhaust clamps.
Torque : 55 Nm
-
- Connect the 2 electrical connectors to the 2 exhaust actuator control valves.
- Secure the wiring harness to the 4 clips.