Exhaust Rear Section
WARNING: This page is about a different variant/trim than selected.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Service clamp (quantity 2) |
| 2 | Rubber mounts (quantity 4) |
| 3 | Active exhaust actuator - Right |
| 4 | Rearward exhaust outlet pipe (quantity 4) |
| 5 | Rear silencer |
| 6 | Active exhaust actuator - Left |
The exhaust rear section comprises a dual intermediate pipe, which is connected to the rear silencer. The rear silencer is supported by 4 rubber mounts. There are 2 attached to a hanger brackets bolted on the side of the rear subframe. The other 2 are attached to a hanger brackets bolted to the vehicle body. There are 2 exhaust valves are installed on the outlet pipe of each side of the rear silencer.
In production, the center section and the rear section are installed as one component. In service, the rear silencer can be replaced independently and secured with 2 additional service clamps.