Balance Shaft Assembly (G3187030): Part(S)
WARNING: This page is about a different variant/trim than selected.
| STEP | PART NAME | QUALIFICATION | QUANTITY |
|---|---|---|---|
| Step 49 | Clutch cover assembly bolt(s) | Vehicles with manual transmission | 6 |
| Step 17 | Crankshaft front oil seal | All vehicles | 1 |
| Step 22 | Crankshaft mass damper bolt(s) | All vehicles | 4 |
| Step 21 | Crankshaft pulley bolts | All vehicles | 4 |
| Step 38 | Crankshaft rear seal | All vehicles | 1 |
| Step 52 | Drive plate bolts | Vehicles with automatic transmission | 8 |
| Step 42 | Dual mass flywheel bolts. | Vehicles with manual transmission | 8 |
| Step 59 | Lower timing chain lower guide | All vehicles | 1 |
| Step 60 | Lower timing chain lower guide | All vehicles | 1 |
| Step 58 | Lower timing chain tensioner | All vehicles | 1 |
| Step 27 | Lower timing chain tensioner | All vehicles | 1 |
| Step 80 | Oil filter and O-ring seal kit | All vehicles | 1 |
| Step 18 | Oil pan drain plug | All vehicles | 1 |
| Step 57 | Upper timing chain cover gasket | All vehicles | 1 |
| Step 60 | Variable Camshaft Timing (VCT) solenoid O-ring seals | All vehicles | 2 |