LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 110 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Electronic Engine Controls - INGENIUM I6 3.0L Petrol -- Defender/L663) >> Electronic Engine Controls - INGENIUM I6 3.0L Petrol >> Removal And Installation >> Lower Hose Coolant Temperature Sensor (G2325407) >> Installation

Lower Hose Coolant Temperature Sensor (G2325407): Installation

WARNING: This page is about a different variant/trim than selected.
  1. WARNING: Be prepared to collect escaping fluids.
    CAUTION: Make sure that the mating surfaces are clean and free from debris and foreign material.
    • Install the lower hose coolant temperature sensor.
    • Install the lower hose coolant temperature sensor clip.
    • Make sure the clip is correctly installed.
    • Connect the electrical connector.
  2. Vacuum fill the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING

scientia non olet · About LEMON Manuals