Adaptive Speed Control Module Adjustment - Vehicles Without: SVR (G2245809): Adjustment

WARNING: This page is about a different variant/trim than selected.

- From the diagnostic tool menu, select: Service Alignment Mode.
  General Equipment: Jaguar Land Rover approved diagnostic equipment
- The follow indicator will now be flashing, this indicates that the vehicle is in "service alignment" and now requires driving.
- The vehicle speed must be above 30 mph (48 kph).
- Choose a road with plenty of stationary objects, like street lights, road signs, or barriers. Use an inside or outside lane.
- Following vehicles too closely will obscure the stationary targets from the radar, a time gap of 2 seconds is recommended.
- A straight road will produce a quicker and better result, although the process will still operate on a curved road.
- When the flashing follow indicator light extinguishes, the ACC system is now functional, and a required vehicle speed can now be set by the driver and the ACC system will operate as normal.