Ignition Coil-On-Plug (G2796645): Installation

WARNING: This page is about a different variant/trim than selected.

- Install the ignition coil-on-plug.
- Install and tighten the bolt.
  Torque : 7 Nm
- Connect the electrical connector.
- Remove the oil filler cap.
- Install the NVH material.
- Install the oil filler cap.
- Install the 2 fuel lines.
Install the engine cover.
Refer to: ENGINE COVER - V8 S/C 5.0L PETROL
Connect the 12V system.
Refer to: 12V SYSTEM DISCONNECT AND CONNECT