Positive Crankcase Ventilation Cap (G2796648): Removal

WARNING: This page is about a different variant/trim than selected.

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING (100-02 Jacking and Lifting, Description and Operation).
Remove the supercharger.
Refer to: SUPERCHARGER (303-12D Intake Air Distribution and Filtering - V8 S/C 5.0L Petrol, Removal and Installation).
CAUTION:
- Damaging the positive crankcase ventilation cap is unavoidable.
- Take care not to damage the camshaft cover.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove and discard the positive crankcase ventilation cap.
CAUTION: The positive crankcase ventilation cap spring will be under tension, take care when removing it from the camshaft cover.

NOTE: Note the orientation of the positive crankcase ventilation cap seal and spring prior to removal.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove the positive crankcase ventilation cap seal and spring.
- Retain the positive crankcase ventilation spring for the installation.