Front Electric Cooling Fan (G2818257): Installation
WARNING: This page is about a different variant/trim than selected.
-
CAUTION:
- Take extra care not to damage the component.
- Make sure that the locating pegs are correctly installed.
- Install the electric cooling fan at the 2 clips.
- Install and tighten the 2 bolts.
Torque : 7 Nm
-
- Install the coolant pipe to the charge air radiator.
- Install the clamp.
- Install the 2 coolant pipe clips.
-
CAUTION: Take extra care not to damage the component.
- Install the cooling module air deflector at the 6 clips.
- Install the electric cooling fan wiring harness clip.
- Install the cooling module.
Refer to: COOLING MODULE
- Connect the 12V system.
Refer to: 12V SYSTEM DISCONNECT AND CONNECT