Coolant Expansion Tank (G2796572): Installation

WARNING: This page is about a different variant/trim than selected.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Install the blanking cap.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Install the coolant expansion tank.
- Connect the electrical connector.
- Connect the coolant hose.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Install the coolant expansion tank to the original position.
- Install and tighten the bolt.
  Torque : 2.8 Nm
CAUTION: Take extra care not to damage the component.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Connect the 2 coolant pipe connectors.
Install the left air cleaner.
Refer to: LEFT AIR CLEANER
Fill the engine cooling system with the correct amount of coolant fluid.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Install the engine compartment front cover.
- Install the 8 fasteners.