LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2022 >> Defender 110 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Cooling - V8 S/C 5.0L Petrol -- Defender/L663) >> Engine Cooling - V8 S/C 5.0L Petrol (G2796565) >> Description And Operation >> Engine Cooling - V8 S/C 5.0L Petrol (G2796566) >> Description >> Radiator

Engine Cooling - V8 S/C 5.0L Petrol (G2796566): Description: Radiator

WARNING: This page is about a different variant/trim than selected.
G14057432Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
ITEM DESCRIPTION
1 Top mounts
2 Hose connection - Coolant expansion tank
3 Hose connection - Radiator upper hose
4 Lower mounts
5 ATF  cooler hose connection
6 Drain screw
7 Hose connection - Radiator lower hose

The radiator is a vertical flow type with an aluminum core and plastic end tanks. The radiator is located in the vehicle by bushes attached to the end tanks. The lower bushes are installed in the front subframe. The upper bushes are installed in the front end carrier.

A low temperature zone is located at the left side of the radiator and provides cooled engine coolant for the ATF  cooler.

Upper and lower hose connections are incorporated into the upper and lower end tanks respectively. The lower end tank also incorporates a drain screw, and a connection for the supply hose of the ATF  cooler. The upper end tank incorporates a connection for a vent hose to the coolant expansion tank. The end tanks also incorporate mounting points for viscous and electric cooling fan shrouds, and the Air Conditioning (A/C) condenser.