| Engine cranks but does not start |
- Positive crankcase ventilation system leaking/blocked
- Ignition system fault
- Fuel system fault
- Engine system fault
|
- Inspect the integrity of the positive crankcase ventilation system. Rectify as necessary
- Refer to the relevant service information and inspect the ignition system. Rectify as necessary
- Refer to the relevant service information and inspect the fuel system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
|
| Engine cranks and fires, but will not start |
- Evaporative emissions system fault
- Ignition system fault
- Fuel system fault
- Engine system fault
|
- Refer to the relevant service information and inspect the evaporative emissions system. Rectify as necessary
- Refer to the relevant service information and inspect the ignition system. Rectify as necessary
- Refer to the relevant service information and inspect the fuel system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
|
| Engine difficult to start (cold engine) |
- Battery/charging system fault
- Engine system fault
- Fuel system fault
- Evaporative emissions system fault
|
- Refer to the relevant service information and inspect the battery and charging system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
- Refer to the relevant service information and inspect the fuel system. Rectify as necessary
- Refer to the relevant service information and inspect the evaporative emissions system. Rectify as necessary
|
| Engine difficult to start (warm/hot engine) |
- Injector(s) leaking
- Engine system fault
- Evaporative emissions system fault
- Fuel system fault
- Ignition system fault
|
- Inspect the injectors for leaks. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
- Refer to the relevant service information and inspect the evaporative emissions system. Rectify as necessary
- Refer to the relevant service information and inspect the fuel system. Rectify as necessary
- Refer to the relevant service information and inspect the ignition system. Rectify as necessary
|
| Engine difficult to start after hot soak (vehicle standing, engine off, after engine has reached operating temperature) |
- Injector(s) leaking
- Engine system fault
- Evaporative emissions system fault
- Fuel system fault
- Ignition system fault
|
- Inspect the injectors for leaks. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
- Refer to the relevant service information and inspect the evaporative emissions system. Rectify as necessary
- Refer to the relevant service information and inspect the fuel system. Rectify as necessary
- Refer to the relevant service information and inspect the ignition system. Rectify as necessary
|
| Engine stalls soon after start |
- Positive crankcase ventilation system leaking/blocked
- Engine system fault
- Ignition system fault
- Intake pipe restricted/blocked
- Air filter element restricted/blocked
- Intake pipe disconnected/damaged after the air cleaner
- Fuel system fault
|
- Inspect the integrity of the positive crankcase ventilation system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
- Refer to the relevant service information and inspect the ignition system. Rectify as necessary
- Inspect the intake pipe for restrictions and blockages. Rectify as necessary
- Install a new air filter element as necessary
- Inspect the intake system for correct installation and damage. Rectify as necessary
- Refer to the relevant service information and inspect the fuel system. Rectify as necessary
|
| Engine hesitates/poor acceleration |
- Fuel system fault
- Injector(s) leaking
- Intake pipe disconnected/damaged after the air cleaner
- Engine system fault
- Accelerator pedal movement restricted (carpet, mats, etc)
- Ignition system fault
- Transmission fault
|
- Refer to the relevant service information and inspect the fuel system. Rectify as necessary
- Inspect the injectors for leaks. Rectify as necessary
- Inspect the intake system for correct installation and damage. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
- Check that the accelerator pedal is free from restriction. Rectify as necessary
- Refer to the relevant service information and inspect the ignition system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the transmission control module for related DTCs and refer to the relevant DTC index
|
| Engine backfires |
- Fuel system fault
- Intake pipe disconnected/damaged after the air cleaner
- Engine system fault
- Ignition system fault
- Variable camshaft timing system stuck active
|
- Refer to the relevant service information and inspect the fuel system. Rectify as necessary
- Inspect the intake system for correct installation and damage. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
- Refer to the relevant service information and inspect the ignition system. Rectify as necessary
- Inspect the operation of the variable camshaft timing system. Rectify as necessary
|
| Engine surges |
- Fuel system fault
- Engine system fault
- Ignition system fault
|
- Refer to the relevant service information and inspect the fuel system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
- Refer to the relevant service information and inspect the ignition system. Rectify as necessary
|
| Engine detonates/knocks |
- Engine system fault
- Fuel system fault
- Intake pipe disconnected/damaged after the air cleaner
- Variable camshaft timing system stuck active
|
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
- Refer to the relevant service information and inspect the fuel system. Rectify as necessary
- Inspect the intake system for correct installation and damage. Rectify as necessary
- Inspect the operation of the variable camshaft timing system. Rectify as necessary
|
| No accelerator response |
|
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
|
| Accelerator response poor |
- Engine system fault
- Positive crankcase ventilation system leaking/blocked
- Transmission fault
- Dynamic stability control event
- Intake pipe disconnected/damaged after the air cleaner
|
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTCs and refer to the relevant DTC index
- Inspect the integrity of the positive crankcase ventilation system. Rectify as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the transmission control module for related DTCs and refer to the relevant DTC index
- No fault - Accelerator pedal response may be temporarily reduced or inhibited when the dynamic stability control is active
- Inspect the intake system for correct installation and damage. Rectify as necessary
|
| Fuel gauge reading empty with fuel in the fuel tank |
- Active fuel level sensor circuit open circuit
- Passive fuel level sensor circuit open circuit
- Instrument cluster internal failure
|
- Refer to the electrical circuit diagrams and inspect the active fuel level sensor circuit for open circuit, high resistance. Repair the wiring harness or install a new active fuel level sensor as necessary
- Refer to the electrical circuit diagrams and inspect the passive fuel level sensor circuit for open circuit, high resistance. Repair the wiring harness or install a new passive fuel level sensor as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - Fuel Level Sensor Test
|
| Fuel gauge not reading empty with no fuel in the fuel tank |
- Jet pump fault or fuel crossover tube blocked or leaking
|
- Using the Jaguar Land Rover approved diagnostic equipment, check datalogger signals - Fuel Level Sensor Pump Voltage - Raw - Fuel Level Sensor Eject Voltage - Raw. Make sure the sensors read the same. If the readings vary, check that the jet pump is transferring fuel from the left side to the right side. Rectify as necessary
|